Control your Bi-mode Z06/ZR1 or NPP exhaust with your FOOT
Installs in minutes,
simply remove the OEM dead pedal (very easy, 2 nuts) and install this one by drilling a 1/2 hole in your existing pedal. The special flat wire harness simply passes from the driver side to the passenger
side and you then simply plug in the adapter into the fuse block. No ground
wire to install.
Zero drain, starts in the
last setting you left it. No fob, no wireless, no visor. The heavy duty switch is in simple reach, press loud, press quite, how simple. You can even switch it prior to starting the car.
You can use your dead pedal and you will
just need to drill a 1/2" hole for the switch and install the switch and you have the same item as above. I provide a heavy duty switch, stress relief block and zip tie, special flat shielded cable, Fuse
taps and fuses and special exhaust fuse bypass spade. 10 min install.
